Showing posts with label 1:300. Show all posts
Showing posts with label 1:300. Show all posts

Tuesday, February 19, 2019

1/300 Freighter and Explosion Markers


We've been enjoying 'Cruel Seas' and so I thought I'd finally finish the freighter that came with the initial expanded release. So, I give you a poor stricken freighter, with a violent explosion amidships, soon to be added to the tonnage tally of a luck U-Boat captain.

For the water spume effect I used the same 3D fractal model explosion that I used a few years ago for my exploding Star Wars ships. 



I sectioned the fractal model into several pieces, switched them around, affixed the four 'boom bits' to pennies (to add a bit of weight) and was off to the races.

The airbrush made fairly short work of them, with only a few layers of green and white added with the brush. Blamo-Presto: Water Explosions!



The freighter is fairly stock work, but I did drill out the stern deck to provide a magnetised mounting for a deck gun to be swapped in if a scenario required it. Sadly, the painting is a bit uninspired (I blame the rush to finally get it finished) and it frankly shows. Nonetheless, it's done and we have a juicy target for future torpedo/bomb runs.



Thanks for dropping in folks!

Friday, December 28, 2018

German E-Boats for 'Cruel Seas'


Weirdly, as a prairie boy, I've always had a great fascination for naval warfare, being an enthusiast of the large ship games like 'Wooden Ships and Iron Men', 'Fleet Action Imminent' and 'General Quarters III'. So, when I saw the promo ads for Warlord Games' new 'Cruel Seas' I knew I had to jump in with both feet. 

The WWII coastal war setting really hasn't been done in a comprehensive way, meaning with purpose built rules and a full range of miniatures, so I think Warlord may be onto something really exciting here. As soon as I unpacked my copy of the 'Cruel Seas' I quickly assembled the core set miniatures and tried out the introductory scenarios with The Friday Night Raconteurs. Thankfully the hype for the game is not misplaced. The rules play very well and give a fast, furious, action-filled game without being too ponderous or 'crunchy'.

This past Friday, I hosted another 'Cruel Seas' game for the boys and really wanted to get some of the miniatures properly painted for the tabletop. Thankfully I had the day off so I lashed away and managed to get most of the Motor Torpedo Boats and E Boats completed for the night's fun. So, here are four of the German E-Boats ('Enemy Boats' or as the Kriegsmarine classed them Schnellboots), a brace each of the S-38 class and the later S-100 class.


These are 1/300 scale plastic kits (those in the UK will probably have seen them included with the latest Wargames Illustrated). Very easy to put together and a breeze to paint. I like that Warlord included two sheets of ensigns for both the British and the Germans.


I really like the design aesthetic of these boats, with their menacing low, long silhouettes, exposed torpedoes and decks bristling with all forms of automatic weapons. They really look the business.

S-38 Class E-Boats

The two S-100s here have the optional quad 20mm flak gun ('Flakvierling'), which, as you can imagine, would be a pretty ferocious weapon in setting where most of things you were shooting at were constructed of thin wood planking or thin steel.

Later S-100 Class E-Boats with quad 20mm at the stern

The paint scheme I went with is fairly stock to what most vessels in the Kriegsmarine would have sported. I put aside the supplied painting guide and decided instead to keep the colours anachronistically punchy to help them stand out on the tabletop. In the future I'll do up one or two boats in the distinctive (but more rare) splinter pattern camouflage to denote Veteran crews. (BTW, if anyone has a set of the MTBs/EBoats from the recent Wargames Illustrated that they don't want please drop me a note.) 

The British Vosper MTBs will be coming up soon.

Thanks for dropping in folks!

Tuesday, October 11, 2016

Epic 30K Adeptus Mechanicus and a 3D Printer(!)


For a slight change of pace here are the beginnings of a small Mechanicus force for our Epic 30K campaigns.

I've been a big fan of Epic since its first inception as 'Adeptus Titanicus' way back in 1988. The 4th edition of the rules 'Epic: Armageddon' is perhaps the best version, with easy to understand rules providing a quick enjoyable game (though I still feel a little nostalgia for the mental, highly-detailed 2nd edition). 


In the Warhammer 30k/40K universe the Adeptus Mechanicus is a technological organization, often known as the Priesthood of Mars. It holds a monopoly on technological knowledge in the Imperium. Their factory worlds, know as Forge Worlds, turn out the Imperium's most powerful and advanced weaponry and equipment. The organization's adepts, the Tech-priests, are vital in maintaining much of the Imperium's more technologically advanced equipment, particularly the wargear of the Adeptus Astartes, the Space Marines.  They are a parallel organization to the Imperium of Man, separate yet sympathetic, and even possess their own religion, based around a Machine God an 'Omnisiah'.


Yes, it's all very fun, silly and marvelously baroque. 

My good friend Greg has been doing amazing work with Epic 30K and I thought I'd pitch in with this Mechanicus force.

Riffing on the baroque esthetic, I thought a corresponding red, steel and brass paintjob was in order.
 
Triaros Armoured Conveyors

Thallax Infantry with a Tech-Priest


Usarax close assault Infantry
'Falchion' War Engine



Small but still hefty.

I have a few more of these to finish off and will report when they are done (don't worry, there are definitely some 'larger bits' in the works...).

Also, as a new addition to the hobby room, I recently purchased a 3D printer kit. I've been fascinated by the technology every since it first emerged and with prices finally coming within reach I thought I'd take the plunge.

Yes, that glass was filled and emptied several times during the build...

With about an hour a night, the kit took me a week to assemble. Huge credit for this goes to my friend Byron, who came for a weekend visit and helped me with the final wiring and calibration. (Thanks again Byron!)

I have to say that no matter what the promotional literature and advertising may tell you, the technology is not yet matured for the mainline consumer - not yet. From what I've come to understand from working (wrestling) with mine is that these printers are very fiddly and prone to repeated breakdowns/recalibrations. There are a multitude of things that can go wrong and many of the issues just can't be anticipated. Things happen. BUT with all this being said, when it works it's truly AMAZING. I can't get over the rush of simply 'printing' a 3 dimensional object in my own home. It's just so darned cool.

Anyway, to close the post, here are a few samples of the things that I've printed off since we assembled the machine.

A 1:4800 scale model of Helm's Deep.

1:4800 scale Helm's Deep
A 1:600 model of architect Le Corbusier's 'La Savoye' (now one of France's World Heritage buildings)

Le Corbusier's 'La Savoye'
A few Epic-themed buildings downloaded from 'Thingiverse'.


For the wrecked building below I added a bit of rubble to make it a bit less sterile.

A shattered building for Epic

I'll keep at it and if I can, I'll let you know what I'm up to with the printer from time to time.

Thanks for dropping by folks! I hope to have some new stuff next week so please come over for a visit.

Sunday, July 6, 2014

28mm Napoleonic French During the Russian Retreat and FormulaD Racing! (wtf?)


Ahhh, summer has finally made its presence felt here in the Canadian prairies (upwards to +30C temperatures this past week). Admittedly it's a bit late, but I'll happily take it, and so to celebrate I decided to host our weekly game out in our courtyard. This week we played an old favourite: 'Formula D'. 



Yes, they may look a mild mannered bunch but you should have seen the fisticuffs in the street after the game...
For those who may not have tried it 'Formula D' is F1 racing game which has players competing over a variety of tracks which depict famous Grad Prix racing circuits from around the world. Each car is rated 'wearpoints' for its Tires, Brakes, Gearbox, Engine, etc. which the players have to carefully manage during the race. The game utilizes various modified polyhedron dice to reflect gear changes (D4 for 1st gear, D6 for 2nd, etc.) and the trick is to find the 'sweet spot' gear in order to speed down the straights, but yet slow enough for the coming turn. Its dead-easy to learn, a trick to master and a heap of fun to play. The cars models that come with the game are fairly uninspired plastic affairs, but you can find 'after market' models on eBay to pimp your game. My good friend Dallas acquired and painted these cars for my birthday years ago (Thanks Dal!) and they get heavy use in our F1 scrums (I've had to give them a few touchups due to 'rubbing' in the corners!). 

1/300 scale F1 cars (with my favourite, Jaguar Racing, in the lead.)
As one of our several ongoing mini-campaigns, we've been conducting a full Grand Prix season this past year and this was our 4th race (Hungarian Grand Prix - a fairly fast track). 

The only place where you can safely drink & drive... Here we have Peter utilizing his mad math skills and devious slight of hand tricks in an effort to bamboozle the rest of us.  Sylvain, as you can see, was onto him like white on rice.
I managed to cheat better than the rest of the boys and so pipped first place, but Sylvain surprised us all by not exploding spectacularly, or driving headlong into the fan-packed stands, instead he came through with a heart-stopping second place, just in front of Peter. We will not speak of Stacy's appalling luck-of-the-dice as his curse may manifest itself in the retelling... 

Otherwise the hobby desk has been largely neglected in favour of enjoying the weather and working on some yard projects. That being said I have managed to get a few pieces done. Here are four unfortunate sons of France, fighting their way out of snow-swept Russia.


The fellow firing over his frozen comrade, the kneeling chasseur with sword and pistol and the carbine-armed lancer are all Perry models, while Michel Ney, 'The Bravest of the Brave', is from Gorgon Studios.










'Le Rougeaud': The last Frenchman to leave Russian soil.

It was a treat to paint these guys during the recent warm weather as many of their predecessors were grudgingly 'inspired' by the -50C conditions of our past winter (yuk). 

I have quite of few of these poor blighters left to do but they'll have to wait a bit longer as I feel like moving on to something else...

Wednesday, March 12, 2014

From LeeH: 6mm WWII German Panzer IV F1s & Panzer IIIs (30 points)


From Lee:
Well I'm inching towards my target and might just make it now...providing I get my final Bonus round model in on time! In the meantime today's submission is part of my ongoing North Africa 1942 project and marks the beginning of a new phase of expansion for my Desert collection. This latest batch of German tanks will fill a few holes in the existing ranks and help flesh out the core companies I am building before going on and starting new ones.

There are a mix of 6mm models in this formation. First off a platoon of Panzer IV F1's by GHQ. As usual the quality of these models is superb and with the right amount of highlighting and pigmented wash all the detail can be seen. Then I have some Panzer III N's again by GHQ. I'll need to buy several more platoons as these form the backbone of my panzer forces for late 1942. Lastly some more Panzer IV F1's but this time from Scotia. I came across these particular models by chance at a show recently and decided to give them a try. They are less detailed and slightly smaller than the GHQ examples - Scotia are 1/300 while GHQ are 1/285. I'll assign the two platoons of Pzr IV F1's to different companies and my players probably won't even notice the difference.

Incidentally I have altered my base labels for these models to include a national flag symbol and a regiment number. I have been reorganising my existing platoons into newly constituted companies as part of a longer term plan (something I should have done before I started the project!) so I will be going back and replacing all the base labels on my existing collection over the next few weeks.... but not until after the Challenge is over!

The Oasis model is also a newly completed project, even though I know I can't enter it into the Challenge. Once the idea was lodged in my head the urge to do some terrain building was more than I could resist!

Wonderful work Lee. As I've mentioned before I've been a great admirer of your basing and overall presentation with this project. The labels are ace, I feel for you having to change tack mid-stream.

Love the oasis, but it needs more camel... ;-p

These microscale DAK tanks will give Lee 30 points, enough for him to reach his 600 point target. The pressure's off Lee - well done and congratulations!

Wednesday, February 26, 2014

From LeeH: 6mm WWII Italian Desert Armour & Open Blitz Trucks (30 points)


From Lee:
My latest entry is yet more 6mm North Africa hardware...so not mega points! First off here are five Italian P40 Heavy Tanks. These were in development for several years with the first production models appearing in late 1942. The subsequent loss of the factory making the engines meant that by wars end only 22 had been produced, so inclusion in any army is speculative at best. 

A small number of P40's were sent to North Africa and saw action in Egypt so I've decided to paint up one platoon just to bolster my Italian tank forces. These particular models are from GHQ and as you would expect the quality is excellent with superb detailing. 
Keeping with the Italians I have also painted up four AB41 armoured cars to provide some recon screening for my Italian forces. These are some old recycled H&R models that I stripped for repainting. They have a lot less detail than the GHQ equivalent but at a mere £0.40 each compared to £1.40 for the GHQ models its hard to find fault with them! Personally I mix and match manufacturers based entirely on availability of vehicle types within the respective ranges, price is a secondary issue.

Last up I painted six Opel Blitz trucks (seen in the top photos). These can be used by most German forces and in this case they will form part of a supply convoy for a battle scenario I am working on. 

I've really enjoyed seeing this project develop over the past year. The overall aesthetic of the vehicles, their wonderful rounded bases, desert terrain and attendant game markers (see his fabulous smoke markers here) is wonderfully realized. Well done Lee!

These Italian vehicles and German trucks will provide Lee with 30 points to add to his total.